How to clean computer monitor lcd screen The display is one of elements that gets dirty more easily from the computer. Learn how to clean your monitor, what materials should be used and the most effective way to quit as new is useful information to keep your equipment correctly.
Before, when the majority of the computers had LCD monitors CRT was not necessary to take account of advice on how to clean the PC monitor. But now, with flat LCD screens, LED or plasma is necessary to use specific materials and follow a series of steps since they are much more delicate.
Clean the monitor is something very simple that will require some basic materials and one of the tasks that you should not leave out to keep your new equipment.
Tips for cleaning your monitor
- Avoid touching the screen with your fingers. Even with frequent cleaning the skin naturally has fat that leave a mark in your monitor.
- Do not expose the display to certain environments where particles can be marked, gradually and almost no that you realize. For example, the kitchen.
- If you will not use the monitor for a long period of time protected by storing it in an enclosed area or covering it.
How to clean LCD, LED or plasma monitor
For all types of screen the steps are the same:
- Turns off the monitor.
- With a soft cloth, dry and lint start cleaning the frame.
- Then, clean the screen with the same cloth. Do it gently because they are fragile devices.
A good choice, if you have one, It is to use a brush to dust to first remove this and make the most effective cleaning.
The first thing to clarify is that current computer monitors are mainly TFT/LCD and, therefore, plastic (not for glass). Be clear about this to avoid committing a common mistake – and that may be fatal- and it is that under no circumstances you should use products for glass cleaning. They are abrasive and can irreparably damage your computer screen.
If the dry cloth to clean the screen isn’t enough there are some alternatives that you can try. First, it is cleaning fluid screens that are available in specialty stores. But there is also homemade recipes:
- Solution by mixing warm distilled water with a few drops of liquid for dishwasher.
- Solution of equal parts of isopropyl alcohol and distilled water.
- Solution by mixing same quantities of vinegar and distilled water.
The solutions are purchased or created by ourselves, shall be directly applied to the cloth, never on the screen. After you wipe with a slightly damp cloth, use a cloth to dry the monitor.
Importantly, use a soft cloth and no napkins, paper kitchen or toilet paper that can damage the screen due to its surface. The cloth must be clean, as if it was used before it can contain attached junk that ends leaving marks on the monitor.
A recommendation in both cases is to remove excess dust that may be on the screen previously. And it is that if you restriegas a lot of specks of dust the surface with any of rags, it can be scratched. A feather duster will serve for this purpose.
If the screen has spots of fingerprints, water may not be enough and you’d have to add a little neutral SOAP to liquid. But in this case, if the stains are difficult, it is safer to use a specific product such as the one mentioned above. Or towel baby which they have lots of SOAP.
Some brands, such as Apple, also offer a simple solution when you buy one of their computers: a piece of cloth as that used to clean eyeglasses.
How to clean flat and tactile screens
First of all, check the manual to see if there is a cleaning procedure specifically recommended for your equipment. That will be the best way to clean it, above any other procedure.
- If you do not have the manual, or if the manual does not indicate, look for a completely clean microfiber wipe, preferably those used to clean eyeglasses, as they do not leave lint. Do not use any kind of paper, such as kitchen towels, toilet paper, or scraps of cotton cloth or cloth or towel, as they are more abrasive than ultra soft microfiber fabrics, and could produce scratches on the delicate surface of the screen. , plus they leave lint.
- Turn off your TV, screen, etc. Make sure it has been turned off for at least half an hour and is completely cool to the touch. Doing this will not only allow you to see better the dirt and dust your screen may have, it will also prevent the cleaner you use from drying up before giving you time to clean it, which could cause permanent stains on the screen.
- It is best to clean this type of equipment in dry. With the wipe of dry microfiber, gently cleans the screen or monitor using smooth and horizontal, non-vertical movements. If this is not enough to remove all dirt, do not push the screen in an attempt to remove the dirty. Pressing the screen can cause some pixels to burn, especially on laptops, desktop monitors, and LCD and LED TVs.
- If the dry microfiber wipe was not enough to completely remove the dirt from your screen or TV, you can apply a minimum amount of cleaning fluid in the wipe, never on the screen, and clean it again carefully. Never allow the wipe to be “wet”, so the liquid will drip or streaking from it. You could cause permanent damage to your TV.
- Ideally clean carefully with a first wipe of microfiber with cleaner, and immediately pass another wipe of clean and dry microfiber, using smooth and horizontal movements, to dry the screen cleaner.
- Finally, with the same microfiber wipes, clean or shake the plastic frame around your screen, to remove dust and finger marks, grease and other dirt.
- Make sure to wash the used wipes, so that the next time you clean your screen or TV, do not run the risk of using it dirty.